Discussion:
[rescue] E450 Console puzzler
Steve Hatle
2018-01-22 00:27:19 UTC
Permalink
Just to tie up this thread, I found my E450 had the header for a UPA
framebuffer. A quick trip to the spares box turned up a framebuffer from
an old Ultra 1 or 2. Popped that in, and everything was OK with a Sun
monitor and keyboard. That's enough console for me to get an OS installed.
_______________________________________________
rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
Sandwich Maker
2018-01-22 22:16:21 UTC
Permalink
" From: "Steve Hatle" <***@nfldinet.com>
"
" Just to tie up this thread, I found my E450 had the header for a UPA
" framebuffer. A quick trip to the spares box turned up a framebuffer from
" an old Ultra 1 or 2. Popped that in, and everything was OK with a Sun
" monitor and keyboard. That's enough console for me to get an OS installed.

workstation versions should have *two* headers. sadly, mine, as a
server, doesn't, though the spots on the main board are there, but it
does have the 20-disk expansion hardware.
________________________________________________________________________
Andrew Hay the genius nature
internet rambler is to see what all have seen
***@an.bradford.ma.us and think what none thought
_______________________________________________
rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
Steve Hatle
2018-01-23 00:06:36 UTC
Permalink
Mine does have the two headers, but does not have the correct back panel
to bring out the second UPA. The hardware manual talks about having to
replace this if you want to use the second UPA.

Mine does identify itself as "server" in OBP, but I understand that's a
setting that can be changed.

I wish I had the SCSI backplane expansion! Mine only has the 4 disk
backplane. Of course two more 400Mhz CPU and voltage regulators would be
fun as well!

Steve
Post by Sandwich Maker
"
" Just to tie up this thread, I found my E450 had the header for a UPA
" framebuffer. A quick trip to the spares box turned up a framebuffer from
" an old Ultra 1 or 2. Popped that in, and everything was OK with a Sun
" monitor and keyboard. That's enough console for me to get an OS installed.
workstation versions should have *two* headers. sadly, mine, as a
server, doesn't, though the spots on the main board are there, but it
does have the 20-disk expansion hardware.
________________________________________________________________________
Andrew Hay the genius nature
internet rambler is to see what all have seen
_______________________________________________
rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
_______________________________________________
rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
Sandwich Maker
2018-01-23 13:13:27 UTC
Permalink
" From: Steve Hatle <***@nfldinet.com>
"
" Mine does have the two headers, but does not have the correct back panel
" to bring out the second UPA. The hardware manual talks about having to
" replace this if you want to use the second UPA.

curious! it's been quite a while since i opened mine up, but looking
at it sideways [since the board's on edge], it appears to have blanked
openings for 2 upas side by side, with a blanked sbus under one and a
db25 under the other. why would they bother to make multiple panels?

" Mine does identify itself as "server" in OBP, but I understand that's a
" setting that can be changed.
"
" I wish I had the SCSI backplane expansion! Mine only has the 4 disk
" backplane. Of course two more 400Mhz CPU and voltage regulators would be
" fun as well!

mine's pretty fully loaded as servers go, with 4*480s and 20*18G;
can't recall what the ram is but that's maxed out too.

i'd be tempted to offer you my system if you weren't so far away - i'm
in 01835 and shipping a 180-odd lb monster is just not on - b/c i
haven't done much with it for a while and don't know if i ever will.
then again, given its power budget, it ought to be stuffed with 300g
drives but budget doesn't permit, and even then i'd only have 6tb [!!].
one can get twice that in a single sas drive these days.

" Steve
"
" Sandwich Maker wrote:
" > " From: "Steve Hatle"<***@nfldinet.com>
" > "
" > " Just to tie up this thread, I found my E450 had the header for a UPA
" > " framebuffer. A quick trip to the spares box turned up a framebuffer from
" > " an old Ultra 1 or 2. Popped that in, and everything was OK with a Sun
" > " monitor and keyboard. That's enough console for me to get an OS installed.
" >
" > workstation versions should have *two* headers. sadly, mine, as a
" > server, doesn't, though the spots on the main board are there, but it
" > does have the 20-disk expansion hardware.
________________________________________________________________________
Andrew Hay the genius nature
internet rambler is to see what all have seen
***@an.bradford.ma.us and think what none thought
_______________________________________________
rescue list - http://www.sunhelp.org/mailman/listinfo/rescue

Loading...